Powerful IC210 Engine Petrol Pressure Washer 

The P3500PWA is a powerful portable petrol pressure washer by P1. The Pressure Washer is powered by a 212cc 4 stroke petrol engine which produces 5.6kW of output power.

This high-performance petrol jet washer is perfect for home and DIY use. If you have a patio or driveway to clean, this is the machine for the job.

Petrol Pressure Washer vs Electric Pressure Washer

The table below shows the huge difference in performance between this powerful petrol pressure washer and typical DIY electric pressure washers on the market.

Model	P3500PWA	DIY Electric pressure washer
Power	5600w	1400w to 2000w
Pressure	2990psi/ 206bar	1400psi to 2000psi / 90bar to 140bar
Flow rate	8.7 Litres/minute	5-7 Litres/minute

For a more visual explanation of how a petrol engine powered jet wash is superior to an electric pressure washer, take a look at this video.

The assembly is straightforward and takes just 5 minutes

Insert the stub axles through the wheels and into the holes in the frame and secure them with the R-clips.

The upper handle inserts into the lower frame and is held in place by spring-loaded ball connectors.

Fill the engine with 600ml of SAE30 engine oil. (Do not overfill).

Fill the petrol tank with fresh unleaded petrol. (Do not overfill).

Connect the high-pressure hose to the pump and trigger gun with the M22 threaded connectors.

Select the nozzle required and push firmly into the lance quick release fitting.

Connect your garden hose to the pump inlet using the quick release garden hose connector supplied.

How to start a Petrol Power Washer

Check engine oil level (must be to the top of the oil filler neck) and fuel level.

Petrol ON/OFF switch to the right (ON)

Choke to left (START)

Throttle to middle position

Turn on mains water supply

Hold in the trigger on the lance

Pull recoil start firmly until the engine starts

Move the choke lever to the right (RUN).

Operating the P3500PWA Petrol Power Washer

Important

Do not run the engine without a water supply connected to the pump. The water acts as a coolant and lubricant for the high-pressure pump. If there is no mains water supply connected to the pump, it will overheat the seals and valves and cause permanent damage. Always use fresh mains water. If dirty water is used it can cause damage to the internal parts of the high-pressure pump.

High Pressure Axial Pump

The three-cylinder high-pressure axial pump is fitted with a thermal protection safety valve. If the pressure washer is run without the trigger gun being squeezed open and water flowing through the pump, then the water in the pump will recirculate around the pump and heat up. To prevent the pump from overheating and damaging the seals the thermal protection valve will open and discharge the hot water, which is replaced with fresh cool water. If possible, switch the engine off when not pressure washing. This saves fuel and wear and tear.

Pressure Washer Nozzles

Select the required nozzle and be sure to push it firmly into the quick release fitting on the lance. For normal pressure washing hold the nozzle about 30cm from the object being pressure washed. To use the detergent function, place the black nozzle in the lance and the pressure washer will draw the liquid detergent from the built-in tank. This is a low-pressure nozzle, so when the soap has been applied, change back to the high-pressure nozzle to finish cleaning.

212cc OHV Engine

The Axial pump is driven by a 212cc OHV engine. The OHV engines benefit from low-end torque, fuel-saving and emissions-cutting OHV technology and more compact size when compared to an OHC engine.

Warning

Never point the high-pressure lance at people or animals. Never operate this petrol pressure washer indoors or in a confined space as petrol engines produce lethal Carbon Monoxide fumes. Always switch the engine off and allow it to cool before refuelling. 

Maintenance

Check the engine oil level daily- it can be filled to the top of the oil filler neck with SAE30 or 15w40 engine oil. 

.

Notes about buying a petrol pressure washer

Don’t be fooled by huge pressure ratings. We know our stuff. We’ve been in the industry for 15 years and can tell you it’s not possible to obtain more than 3000psi continuous pressure from a 196cc to 212cc engine fitted with an axial pump unless the flow rate is reduced to such a low level that it is not efficient in real-life use. Other sellers may claim a lot higher pressure ratings. Please be careful when selecting your pressure washer. 

Warranty

Covered by: P1 Two Year Warranty* & UK parts back-up for peace of mind

 

Specifications

Model	P3500PWA
Start Method	Recoil
Max Engine Power (kW)	5.6
Max Pressure (psi)	3480
Max Pressure (bar)	206
Continuous Working Pressure (psi)	3100
Hose Length (m)	7
Max Flow Rate (litres/min)	8.7
Drive	Direct Drive
Engine Type	OHV 4-Stroke
Engine Size (cc)	212
Gravity Feed	No
Mains Supply	Yes
Speed (RPM)	3600
Pump	Axial Pump
Fuel Capacity (L)	3.5
Engine Oil	SAE30 or 15W40
Engine Oil Capacity (ml)	600
Draw From Barrel	Yes (2m)
Built In Detergent Tank	Yes
Frame Material	Powdered Coated Tubular Steel
Noise @ 7m (dB)	99
Gross Weight (kg)	34
Net Weight (kg)	29
Fully Assembled Dimensions (H x W x L) (mm)	1000 x 500 x 600
Packaged Dimensions (H x W x L) (mm)	549 x 520 x 600
Fuel/Power Source	Petrol
Product Type	Pressure Washer
Warranty (years)	2
Commercial Warranty (years)	Commercial Warranty (years)
Model EAN	600231974240
In The Box	P3500PWA, Manual